Tag Archives: BMR

Builder Spotlight with Mateusz Waldowski

Continuing our theme of interviewing builders of exception MOCs, we’re back with European builder Mateusz Waldowski. Mateusz built this awe inspiring bullet train, the Alstom Pendolino ED250 PKP Intercity. We might not have awesome trains like this in the United States, but we sure wish we did! His build is complete with lights, a complete interior (!), and custom stickers. Check it out.

BMR: Tell us a little more about the build. How long did it take? Estimated piece count?
Mateusz: My MOC is 130cm long, has 3500 pieces, 10m of wire inside, lights on the front changing by direction, and lights inside. I first made a sketch in September 2015 and I started building from real bricks in 2016. The build took longer than I expected because I had to collect lots of ideas and continually improve the model.

BMR: What inspired you to build this particular locomotive?
Mateusz: In the LEGO catalogs from my childhood, passenger trains were always express/high speed.


BMR: Is it powered?
Mateusz: Yes. It has two LEGO train motors (old 9V train motor and pf train motor) and the receiver is behind the cab. Power comes from 9V tracks and steering by pf control pilot.

BMR: What is your build process? Do you use some form of digital design program?
Mateusz: I don’t have one way in my building process. For this particular model I used “LEGO Digital Designer” to sketch it, but my 3D model wasn’t good enough and I made lot of changes. In others MOCs I build immediately from real brick.

BMR: What was the hardest bit to get right?
Mateusz: The most difficult was the front of the train. I wanted the train to look very smooth and fast like the original. I didn’t want to have “stairs” on the front of train. (Ed: you certainly succeeded!)


BMR: What’s your favorite detail that other people might not notice?
Mateusz: I don’t know. I spent too long building this train to have an objective opinion about it.

I know what my favorite detail is, the pantographs. Binoculars!

BMR: What’s next?
Mateusz: This year I plan on adding one more car to the Pendolino (with a restaurant inside). Right now I am building another diesel locomotive to add to my PKP Cargo family. I definitely must build more cargo cars.

BMR: What’s best, steam or diesel?
Mateusz: I don’t have a favorite type of locomotive/train. (ed: we’re sure that Mateusz meant to say diesel, but we’ll let it slide this once).

Brickworld 2018 Event Report

Brickworld 2018 is now in the books, and things are starting to return to normal again here at BMR. Once again I made the trip to Chicago to attend, representing both my club, PennLUG, and Brick Model Railroader. Brickworld is a premier LEGO® fan event taking place at the Renaissance Hotel & Convention Center in Schaumburg, IL and is one of the largest LEGO fan events  in North America. It draws some of the best builders in the country, and even a few from over seas. It is also typically the largest gathering of LEGO train fans, and train clubs in the US. If you love LEGO trains, you’ll be in good company at Brickworld.

Union Pacific EMD E9, ABB set by Nathan Flood.

Continue reading Brickworld 2018 Event Report

BrickTracks Announces The R104 Switch Tracks KickStarter Campaign!

And now for some awesome news!

BrickTracks, the company behind those injection-molded R104 and R120 (with R56 now available for pre-order) curves has finally launched a Kickstarter campaign for R104 switch tracks.

I won’t be going into every detail in this post, as everything is explained on the campaign page, but here’s a run-down of what’s going on:

Continue reading BrickTracks Announces The R104 Switch Tracks KickStarter Campaign!

Brick Model Railroader May Updates: Moving Cabooses and Building New Things.

Hello out there to all our readers. We wanted to take a little time to update you on a few things with the store side of BMR.

Northeastern Caboose Shipping

We had a very successful pre order for our North Eastern Caboose kit and we are great full to all of you who placed an order. We know many of you out there are waiting to hear when they will be shipping. Things are nearly inlace, we’re just waiting on instruction books, and lighting kits from our suppliers. Both of which should be here sometime next week. In the mean time we’ve been getting wheel sets, and kit boxes ready so that when everything comes in, we’ll be able to start shipping right away. Which if everything goes according to plan, should be next week. Thank you all for your patience on this.

The Northeastern Caboose model

And the next BMR Premium Instruction Kit will be?

Continue reading Brick Model Railroader May Updates: Moving Cabooses and Building New Things.

Northeastern Caboose Premium Instructions are Open for Preorder

It’s taken a while but our first Premium Instruction Kit of 2018 is ready to preorder. We will be taking orders for this kit until April 30th. Once ordering is closed, we will go into producing kits and expect to start shipping late April, early May.

You can find the Northeastern Caboose Premium Instructions, Decal Sets, Optional Lighting Kit, and extra wheel sets, in our Brick Model Railroader Store.

Northeastern Caboose without Lighting Kit

Northeastern Caboose with Lighting Kit

Northeastern Caboose with optional Lighting Kit installed.

Continue reading Northeastern Caboose Premium Instructions are Open for Preorder

Cabooses or Cabeese? Brick Model Railroader April 2018 Update

Hello out there to all you LEGO® train fans. I know it’s been pretty quiet on the BMR website lately but it’s only because things have been very busy behind the scenes, so here is an update of what’s been happening.

Train Shows!

Being in Pittsburgh territory at the Worlds Greatest Hobby on Tour show, PennLUG made sure that the local train history was well represented with several Pittsburgh and Lake Erie RR models, as well as plenty of Pennsylvania RR locomotives and rolling stock.

The winter season is train show season here in the North Eastern US. Myself, along with BMR partner Glenn Holland have been busy with several train shows that our club, PennLUG, has displayed at, some of which you may have seen articles about here on BMR. Here is where we’ve been over the winter.

Continue reading Cabooses or Cabeese? Brick Model Railroader April 2018 Update

Premium Instruction Restocks and New Decals Added to the BMR Store

Premium Instruction Restocks

Many have been asking when we will be restocking our first four Premium Instruction Kits, and we’ve been listening. Previously, we’ve made a batch of kits to sell, and when they’ve sold out, you would have to wait until we could restock again. We’re going to do things a little different this time though. Since it’s hard for us to gauge demand for each kit, this time we are going to do a pre-order run. So we are opening up pre-orders today, February 5th and will keep it open until March 5th, and how ever many orders we have for each kit is how many we will produce. Once orders are closed, we will need a little time to get the instruction books in from the printer, parts for the wheel sets, and assemble kits. We hope to start shipping orders in mid to late March.

We are doing this for two reasons. Firstly, we hope by doing this that every one who has not had a chance to buy one or all of the cars yet will be able to get them. Second, as we are looking to produce new Premium Instructions for 2018, we want to focus most of our energy toward those new projects, so we are hoping we can do one last big run of the four original cars before diving headlong into new ones. Don’t worry, the original four won’t be gone for good by any means. We hope you’ll agree with us when we want to offer more exciting and new stuff, ideas for which are more than plentiful.

You can find the Pullman PS-1 Box Car, USRA 55ton Hopper, ACF Type 27 Tank Car, and AAR 70ton 53ft Flat Car in our online store.

Brick Model Railroader Store

Continue reading Premium Instruction Restocks and New Decals Added to the BMR Store

2018 Amherst Train Show Report

Every year late in January or early in February, the Amherst Railway Society holds its Railroad Hobby Show at the Eastern States Exposition Fairgrounds (The home of The Big E) in West Springfield, Massachusetts. More than 22,500 railfans and public attended the Show each of the past five years.

This year, the show was held on Saturday January 27th & Sunday 28th. The New England LEGO Users Group was there displaying their amazing Lego train/city layout, and I traveled up to see it, represent Brick Model Railroader, and experience the show.

Maine Central models from Patrick Strawbridge of NELUG

Continue reading 2018 Amherst Train Show Report

NELUG and Brick Model Railroader will be at the 50th Amherst Railway Show January 27th and 28th

On Saturday 27 & Sunday 28 January, the New England LEGO Users Group will be displaying their amazing Lego train/city layout at the 50th Annual Amherst Railway Society Railroad Hobby Show at The Big E Fairground in Springfield, Massachusetts.

NELUG layout from the 2015 show.

About the Show

Every year late in January or early in February, the Amherst Railway Society holds its Railroad Hobby Show at the Eastern States Exposition Fairgrounds (The home of The Big E) in West Springfield Massachusetts. More than 22,500 railfans and public attended the Show each of the past five years.

Continue reading NELUG and Brick Model Railroader will be at the 50th Amherst Railway Show January 27th and 28th

Brick Model Railroader and PennLUG Travel to the 2018 World’s Greatest Hobby on Tour Show in Monroeville PA

PennLUG, and Brick Model Railroader visited the World’s Greatest Hobby on Tour’s first stop of 2018 this past weekend in Monroeville, just outside of Pittsburgh Pennsylvania. Both myself and Glenn Holland were filling dual roles supporting our club, PennLUG’s, LEGO® train layout, and representing BMR at it’s first show in 2018.

Ma&Pa no.43 waits in Red Lion for a passenger train to clear the line.

Continue reading Brick Model Railroader and PennLUG Travel to the 2018 World’s Greatest Hobby on Tour Show in Monroeville PA