Tag Archives: RR

It’s 1976 All Over Again

Every year on July 4th, we here in the United States celebrate the birth of our nation. But in 1976, upon the 200th Anniversary, we threw one heck of big a party. For the US Bicentennial every one in the nation was getting into the spirit. Everything, and we do mean everything, was getting a patriotic Red, White, and Blue treatment. The US railroads were no exception. Railroads across the US were painting locomotives and other equipment in celebration of our country’s 200th birthday. Our Canadian railroad neighbors even got into the spirit. The result of all this stars and stripes hoopla was some of the most interesting and colorful railroad equipment ever seen in North America.

As we all know, model railroad hobbyists, even us LEGO® variety, gravitate toward modeling the interesting and rare. The Bicentennial RR locomotives and rolling stock has been a popular modeling subject ever since that great celebration in 1976. So today, on this July 4th, we’re going to take a look at some Bicentennial models created in LEGO

Bicentennial locomotives from several railroads on display.

Continue reading It’s 1976 All Over Again

Duluth, Missabe, & Iron Range “Yellowstone”

It been a while since we’ve seen a big articulated steam locomotive from LEGO® train builder Anthony Sava. But the wait is over as Anthony’s long planed model of the Duluth, Missabe, & Iron Range class M4 “Yellowstone” is finally completed.

Powerful Brute

Continue reading Duluth, Missabe, & Iron Range “Yellowstone”

Jersey Girl

Central Railroad of New Jersey 1940’s Commuter Train in LEGO

This is my LEGO model of a 1940’s Central Railroad of New Jersey commuter train. This train is typical of those that made up the CNJ’s short haul commuter service in the first half of the 20th century. You may have already seen the locomotive in my recent article on Vinyl Decals, or on a recent youtube livestream. Now that the locomotive is properly decaled, I finally took some time to photograph the whole train and write this article.

Full CNJ commuter train.

The seeds for building this train were planted several years ago while on a trip to visit Steamtown National Historic Site. While there one of the locomotives that caught my attention was an odd little Canadian National engine,  no. 47. Canadian National no. 47 is what is referred to as a “Suburban” locomotive.  These locomotives were built for short haul service on commuter lines. The Suburban type had its tender, carrying coal and water, integrated with the main frame of the locomotive, rather than having a separate “tender” car semi-permanently coupled to the locomotive. This gave the locomotive excellent dual directional capability, handy for when there were no provisions for turn the engine around at the end of it’s run. It was not uncommon to see these engines running backwards pulling their train on a return trip.

Continue reading Jersey Girl

The JJ Young, Jr Flickr Collection

2 weeks ago I  wrote about the Barriger Library and the wonderful historical resource it provides for North American railroading. Today I want to point out another great flickr library that myself and several of my fellow LEGO train builders have been drawing inspiration from. The JJ Young, Jr Library.

The John J. (JJ) Young, Jr. Railroad Photo Collection

CNR pacific #5588 is caught racing as speed with the engineer sounding the engines whistle....

Continue reading The JJ Young, Jr Flickr Collection

The Barriger Railroad Library

Today I would like to draw some attention to one of the coolest Flickr accounts I’ve come across in some time. This one does not have any LEGO train content, but at it’s core, it is proving to be an incredible resource for modeling North American railroads.

J&L steel mill is seen from the Pittsburgh & Lake Erie RR mainline looking east toward J&L tunnel, Pittsburgh PA

Continue reading The Barriger Railroad Library

The PennLUG Lines: Planning a LEGO Train, Club Layout

With Elroy’s articles on Matson’s Landing, and the A/D Track concept, as well as the the Track Geometry article, it seems we have a bit of a theme running right now with train layout design. I too am working on some layout planning, but unlike Elroy’s smaller, personal layout, I’m working on layout designs for my club, PennLUG. And since this is a different kind of beast from a home layout, I thought it would be great to illustrate all the planing that goes into a train layout like ours.

PennLUG Lines logo, based on Reading RR logo.

Planning the PennLUG Lines

Some of you may be familiar with PennLUG’s style of LEGO® train layouts. But for the benefit of those new to us, I will give a bit of background. Continue reading The PennLUG Lines: Planning a LEGO Train, Club Layout