Category Archives: Models

Models built by fans

Bullseye!

After having seen several old-school trains here on Brick Model Railroader, it’s now time for some contemporary models, like this Pesa Dart. It is owned by PKP Intercity, part of the Polish State railways, designed by  Mateusz Waldowski.

https://www.flickr.com/photos/72932485@N03/23880920423/in/dateposted/
Pesa Dart ED161 PKP Intercity by Mateusz Waldowski

Poland is a very interesting country when it comes to modern motive power to model. Thanks to the privatization of several repair & service workshops after 1989, a vivid train manufacturing industry has been set up. Just as back in the days, you can now see on Polish rails again EMU’s, DMU’s and modern locomotive power, all made domestically. The best known one is currently Pesa, and the most recent addition in their fleet has been a 160km/h EMU for PKP Intercity.

Continue reading Bullseye!

1914 Prussian, Electric Demonstrators

Some of the most interesting railway subjects to model can turn up when you start digging into all the experimental and prototype designs that have been tried over the years. Such is the case here with this set of 1914 Prussian, electric demonstrator train equipment by Falk Schulz (a.k.a. bricknerd of Flickr).

EB1 electric slug unit and its control car. photo by Falk Schulz

Continue reading 1914 Prussian, Electric Demonstrators

Just When You Think You’ve Seen it All…

Without a doubt, everyone is aware of the trinity of geared steam locomotives: the shay, the heisler, and the climax. However, even some of the greatest railroad aficionados will fail to mention this geared-hybrid locomotive: the Davenport Duplex locomotive.

I can almost guarantee you’ve never seen one of these before.

In essence, the Davenport was designed as a hybrid mix between a conventional “rod” locomotive and a geared locomotive. There are two configurations: a duplex and a fixed frame locomotive. Featured in this article is the duplex design, pictured above. The boiler, cab, and tender rested on a single frame, which was powered by two independent trucks, complete with both steam cylinders and a sealed, oil tight, gearbox.

 

Rob Hendrix of LifeLites has taken inspiration in the Davenport design and created one in the brick for his second EVER steam locomotive MOC, and has done a fantastic job at it:

It even has lights, courtesy of LifeLites of course.

This locomotive, D.K. & S. No. 3, serviced the Doniphan, Kensett, and Searcy Railroad in White County, Arkansas in 1913. Rob has managed to capture the spirit and vivid detail of the duplex Davenport in his model.

The model uses BlueRail Bluetooth control and sound, LifeLites, and an 11.1 volt LiPo battery powering one L-motor.

Rob’s Flickr

Tiny Tea Kettle in A big World

Sunday Afternoon Tea Train to Tetley:  A Diorama by BrickBaron

Outside of the world of LEGO® Trains, I’ve always has a bit of love for well done G Gauge trains and train layouts. It’s the whimsy that always seems to find it’s way into them. With the scale itself being so large, the modelers tend to pick relatively small trains to model to keep things manageable. Thus the trains take on an almost caricature like quality that brings out the fun in model railroading. That is exactly what you find here in BrickBaron’s scene, Sunday Afternoon Tea Train to Tetley.

The colors, the style, and the detail al work in harmony to build a believable cartoon world.

Continue reading Tiny Tea Kettle in A big World