ANNOUNCING the EMD SD40-2 Premium Instructions

Model Design by Chris Stone

It’s been a long time coming, but the day is finally here. Today we are releasing our Premium Instructions for the EMD SD40-2 Diesel Locomotive. Available now in the Brick Model Railroader Store. And we have a few special surprises in store for you too. But first, let’s take a look at the model.

EMD SD40-2 Premium Instructions

Norfolk Southern model in the “Horse Head” paint scheme with optional parts shown.

The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C road switcher diesel-electric locomotive built by EMD from 1972 to 1989.

The SD40-2 was introduced in January 1972 as part of EMD’s Dash 2 series, competing against the GE U30C and the ALCO Century 630. Although higher-horsepower locomotives were available, including EMD’s own SD45-2, the reliability and versatility of the 3,000-horsepower (2,200 kW) SD40-2 made it one of the best-selling models in EMD’s history, edged only by the GP9, and the standard of the industry for several decades after its introduction. The SD40-2 was an improvement over the SD40, with modular electronic control systems similar to those of the experimental DDA40X.

Burlington Northern model in the “White Face” paint scheme, without the stripe.

Peak production of the SD40-2 was in the mid-1970s. Sales of the SD40-2 began to diminish after 1981 due to the oil crisis, increased competition from GE’s Dash-7 series and the introduction of the EMD SD50, which was available concurrently to late SD40-2 production. The last SD40-2 delivered to a United States railroad was built in July 1984, with production continuing for railroads in Canada until 1988, Mexico until February 1986, and Brazil until October 1989. As of 2013, nearly all built still remain in service.

CONRAIL SD40-2 wearing the “CONRAIL Quality” paint scheme.

Our model of this famous locomotive has been designed by BMR Team Member, Chris Stone. Chris has done a wonderful job capturing the iconic look of the SD40-2.

For this, our first Locomotive Premium Instructions, we are trying something new. For past freight and passenger car models we’ve covered multiple variations  in a single instruction book. But the SD40-2 is a larger model and more complex than previous Premium Instructions and covering all variations and paint schemes in a single book would be impractical. So we are breaking the SD40-2 up into a series based on the railroad paint schemes we plan to offer.

BNSF in the “Heritage 2” Paint Scheme.

The advantage of this is that we can offer a better build- ing experience with parts list specific to each paint scheme. Each instruction book will be tailored to a specific railroad with details explicit to that road high- lighted on each model. 

Our instructions include options to build each railroad’s SD40-2 locomotives in several paint schemes. Also included are instructions for various optional upgrades to the model including No. 6 Wheels, Custom Fan Shrouds, and Knuckle Couplers. More on those optional parts later.

SD40-2 Instruction Books

Our SD40-2 Premium Instructions Kits contain the following:

1 professionally printed 96-124 (page count depending on railroad) page instruction book with full color instructions, part list for each of the build variations, prototype information, and building tips. The books are spiral bound for easy use while building.

1 set of black roller bearing tiles (12 tiles per kit)

2 black Brickarms Monopods used for detailing

4 black Brickarms U-Clips used for detailing.

8 Upgraded Traction Bands

All you need to provide is the LEGO bricks from your own collection. You can purchase decals to build the locomotive in one of a number of authentic paint schemes. 

The first four railroads we are offering are:

Norfolk Southern

Conrail

BNSF

Burlington Northern

In the future we hope to release more railroads. If you have a particular road you would like to see, please let us know.

Store Link to our SD40-2 Instructions

Decals for the EMD SD40-2

We also have a range of decals available for each road name.

Decals sets available for the SD40-2.

Produced for BMR by OKBrickWorks with art work by Cale Leiphart, these decals feature authentically replicated graphics for each of the road names offered.  

Decals are printed on clear vinyl. They are durable, water resistant, and easy to apply. Each decal set will complete one locomotive, and comes with extra numbers so you can change the road number to your desire.

Store Link to our SD40-2 Decal Sets

Optional Parts for the EMD SD40-2

And now about those options. We have more than just decals to add to your SD40-2 model. We have a few other items that can really bring your model to the next level.

Custom No. 6 Wheels

The real SD40-2 locomotive uses wheels that are 40 inches in diameter. In our 1:48th Scale model this scales to within 1 inch of a No. 6 (MS) size wheel. The standard LEGO train wheel ( No. 5 or S ) scales to 33 inches.

Common LEGO wheel sizes.

Our model includes instructions for using either the standard LEGO wheel, or the upgraded No. 6 wheel. For those wanting a more prototypical appearance, the No. 6 wheels give the model a great look.

No. 6 Wheel Pack for the SD40-2.
No. 6 Wheels Installed on the SD40-2 Truck.

These are custom 3D Printed No. 6 (MS) Wheels designed by Cameron Miller and produced by OKBrickworks for Brick Model Railroader.

Includes: 8 3D Printed No. 6 Flange Wheels and 4 3D Printed No. 6 Blind Wheels 

Custom Fan Shrouds

If you are looking to add a special detail to the appearance of your SD40-2 model, we are offering this Custom Fan Shroud Pack.

Fan Shroud Kit

This fan shroud upgrade kit replaces the stock LEGO parts used to represent the dynamic brake and radiator fan shrouds on the top of the model. Also included are fan decals that go under the fan shrouds for that extra detailed look.

Custom Fan Shroud kit installed on the Norfolk Southern SD40-2.

These are a 3d Printed Product designed by Cameron Miller and produced by OKBrickworks for Brick Model Railroader.

Includes: 3 Black 26mm X 6.4mm 3D Printed Fan Shrouds and 2 Black 3D Printed 26mm X 4.8mm Fan Shrouds, and 6 Fan Decals (used under shrouds).

Wheel and Fan Shroud Combo Pack

Planning to buy both the No. 6 wheels and the custom fan shrouds? We are offering a combo pack just for you.

Wheel and Fan Shroud Combo Pack

Includes: 3 Black 26mm X 6.4mm 3D Printed Fan Shrouds and 2 Black 3D Printed 26mm X 4.8mm Fan Shrouds, and 6 Fan Decals (used under shrouds)

8 Black 3D Printed No. 6 Flange Wheels and 4 Black 3D Printed No. 6 Blind Wheels

Extra Bearing Cap Tiles

Each Premium Instruction kit comes with 12 printed 1×1 round tile Roller Bearing Caps for the trucks on the SD40-2. Printed by Brick Print Studios. These tiles recreate the look of roller bearings on the trucks the locomotive. For those wanting to build additional models, we have these bearing caps available separately in packs of 12.

Bearing Cap

Replacement O-Ring Traction Bands

For this model, we recommend the replacement of the stock traction band on the RC Train Wheel with SAE AS568A0.16 Metric 1.5×42 (#35) size Rubber O-Rings for better traction and increased clearance between the track and fuel tank. These will also fit the No. 6 Train Wheel.

Eight O-rings are already supplied in each Premium Instruction Kit, but if you are building a second model, or just want to have some spares on hand, we will be selling a set of eight individually.

O-Ring Replacement Traction Bands

Knuckle Couplers

And last but not least, the SD40-2 can be outfitted with our knuckle couplers. Instructions are included with each model for using either standard LEGO magnetic couplers, or our new knuckle couplers.

Knuckle couplers shown.

The 747S coupler is used with the standard LEGO (No. 5) Train Wheels and the 743S is used with the optional No. 6 Train Wheels.

You can find all these optional parts in the store link bellow.

Store Link to Our Optional Parts

And last but not least, we have restocks of all our previous Premium Instruction models available, as well as decal sets for them and accessories.

BMR Store Link

Thank you, and we hope you enjoy the SD40-2.

The BMR Team

3 thoughts on “ANNOUNCING the EMD SD40-2 Premium Instructions”

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.